10 Step Estimation Process Sample Checklist

Author: · September 10, 2008 · Filed Under Estimation Process, General  - 1 Comment(s)

10 Step Estimating Process Checklist

This should be tuned to the individual companies needs

10 Step Summary

Estimation Step

 

1. Define Scope & Purpose

 

2. Identify Technical Baseline and GR&A

 

3. Collect Data

 

4. Software Sizing (new and reused)

 

5. Prepare Baseline Estimate

 

6. Identify Risk items

 

7. Estimate Validation and Review

 

8. Build a Project Plan

 

9. Document Estimate

 

10. Track Project

 

Ground Rules

 

Assumptions

 

Risk

 

 Step One: Establish Estimate Scope and Purpose

Initials of Analyst when Complete

Item

Notes/Description

 

Identify the Scope; is this an EAC, ETC . . . Also, is integration of this software to other software included? If so, list the other programs that it integrates with that are included here. A portion of SEIT?

 

 

Define the purpose of the estimate (to determine cost, schedule, staffing . . .)

 

 

Point of Contact: establish one or more points of contact: technical data, contract data, requirements information . . .

 

STEP TWO: Establish Technical Baseline, Ground Rules and Assumptions

Initials of Analyst when Complete

Item

Notes/Description

 

Technical baseline. This description will be used as the WBS structure to enter into SEER-SEM. This must include at a minimum each CSCI, their relationship to each other and the outside world (integration), and any currently planned builds/deliveries. Builds/deliveries must be clearly identified, non-delivered builds are much less expensive than actual deliveries.

 

 

Ground rules: a list of all the known conditions surrounding the development (e.g. developer must use DO178b . . .)

 

 

Assumptions: a list of all the information necessary to complete an estimate, but not available to the analyst (e.g. hardware will be available when needed . . .)

 

Step Three: Collect Data

Initials of Analyst when Complete

Item

Notes/Description and Source of the Estimate/Actuals

 

Customize the SEER-SEM data collection worksheets. (i.e. fill in all the parameters that you can using the available documentation so as to minimize the time required from the customer.)

 

 

Complete the customized SEER-SEM data collection worksheets for each CSCI (major computer program).

 

 

Review the data for reasonableness.

 

 

Re-check any parameters in question with the contractor/developer (if possible)

 

Step Four: Software Sizing

Initials of Analyst when Complete

Item

Notes/Description and Source of the Estimate/Actuals

 

Size estimate for all new software to be developed (least, likely, and most). (Make sure the SLOC or Function Point definition is clear)

 

 

Size actuals/estimate for all pre-existing code to be used.

 

 

ReWork parameters evaluated for all pre-existing software.

 

 

All COTS software identified.

 

 

Secondary methodology used for the size estimates.

 

 

Growth factors applied to size estimates.

 

 

Any prototyped code identified.

 

Step Five: Prepare the Baseline Estimate

Initials of Analyst when Complete

Item

Notes/Description

 

Enter all the data in SEER-SEM

 

 

Input notes for each parameter (even if the note says KBase used)

 

 

Analyst review the inputs to make sure they are correct

 

 

Analyst review the outputs to make sure things look right. (This will be done in MUCH more detail in Step 7)

 

 

Analyst and developing contractor together review the inputs (if possible) to either make sure the 2 parties are in agreement, of the differences are documented.

 

 

In a spreadsheet (or similar document) make a comparison of this baseline estimate to the previous one. (if one exists). Note the differences between each estimate. (Use Estimate Track.xls as a basis for the format.)

 

 

Step Six: Quantify Risks and Risk Analysis

Initials of Analyst when Complete

Item

Notes/Description

 

List all the Risks associated with the development of each CSCI (major software program)

 

 

Determine which risks will be included in the estimate (document these decisions in the Ground Rules and Assumptions)

 

 

Decide how to “show/brief” the risks: all included in the estimate; included in the estimate one at a time to show the potential impact of each risk individually . . .

 

Step Seven: Estimate Validation and Review Checklist

(This is just a checklist to review the estimate, not the actual estimate process.)

Initials of Analyst when Complete

Item

Notes/Description

 

Productivity: does the estimated productivity look reasonable within the industry standards and the developing organizations current ability

 

 

Staffing: can/will the developing organization be able to meet the estimated required staffing plan currently and in the future

 

 

Size: have the size estimates been checked for reasonableness and is growth included

 

 

Top 10 Cost Drivers: do the top 10 cost drivers match the program (i.e. if Security is a top cost driver, does the program indeed require security . . .)

 

 

Schedule: if the schedule doesn’t fit into the “master” schedule for the program, what has been done

 

 

Risk: have risks been identified and included in the estimate. Also check the risk/confidence level used to create the estimate.

 

 

Cost: if cost is being used, has the labor rate been verified and a list of costs/included been checked

 

Step Eight: Prepare a project plan based on the estimate ( SEER-SEM Client for Microsoft Project is the tool to do this.)

 

Step Nine: Document the estimate and the lessons learned

Initials of Analyst when Complete

Item

Notes/Description

 

Verify that each parameter selected has an associated note/rationale.

 

 

If there is more than one version of the estimate, verify that each are properly documented

 

 

Make sure the ground rules and assumptions are attached to the estimate.

 

 

Document any special circumstances surrounding the estimate (e.g. estimate done for schedule only . . .)

 

 

Step Ten: Track the project throughout the development

 

Initials of Analyst when Complete

Item

Notes/Description

 

Collect the required data using the SEER-PPMC Metrics Collection data form.

 

 

Using your baseline estimate, enter the data collected above into SEER-PPMC.

 

 

Present and use the data as required by your program.

 

Thank you for reading “Dan on Estimating”, if you would like more information about Galorath’s estimation models, please visit our contact page, call us at +1 310 414-3222 or click a button below to ask sales questions, sign up for our free library or schedule a demo.

Comments

One Response to “10 Step Estimation Process Sample Checklist”

  1. Estimate Review Checklists : Project Planning & Estimation on October 14th, 2009 9:06 pm

    [...] And a blog that includes some of the checklists [...]

Leave a Reply

You must be logged in to post a comment.